When the "Run" window opens please type in winipcfg and click the OK buttonģ. Click on the Start button and click on the Run optionĢ. If you do not, then you may not be able to connect to the internet properly.ġ. Please follow these steps from the computer that was connected directly to the internet with out the router. Hold the Reset button on the router for 30 seconds or moreĬhecking the MAC address of your Computer You may have a few other lights illuminated depending on the model number router you have, but the 3 above must be illuminated for proper connection.ħ. ![]() Note If other lights other than Link/Act are illuminated on this port, that is normal Link/Act (On the port that you connected your computer to) The following lights should be illuminated: Take a different Ethernet cable and plug it into port closest to the WAN port, or into the LAN port.Ħ. Take the connection that you just unplugged from the back of your computer and connect it to the WAN port of the router.ĥ. Now unplug the Ethernet cable that connects to your DSL modem from the back of your computer.Ĥ. If you can not please contact your ISP for further assistance.ģ. Once you've verified that you can get onto the internet without the router please proceed. First connect directly to your Cable modem without the router and verify that you can get on line.Ģ. ![]() ![]() The following article will describe how to setup Comcast High Speed Internet with a Linksys Router:Ĭonnecting your cable modem to the Routerġ. SOURCE: Setting up Comcast High Speed Internet with a Linksys Router
0 Comments
Leave a Reply. |